300 SRT-8 V8-6.1L VIN W (2005)
![background image](/chrysler/300_srt-8/v8-6.1l_vin_w/Page-1252005.png)
10. Using crimping pliers (2), crimp bellows (1) at gear body.
11. If equipped with All-Wheel-Drive and heat shield was removed, install heat shield (3) above inner tie rod bellows (2). Tighten screws to 10 Nm (
89 in lbs ).
12. Thread tie rod jam nut onto inner tie rod far enough to install outer tie rod.
13. Install outer tie rod.