300 SRT-8 V8-6.1L VIN W (2005)
Ball Joint: Service and Repair
Ball Joint
Disassembly
DISASSEMBLY - BALL JOINT
NOTE: To perform this procedure it works best to mount Press (3), Special Tool C-4212F, in a vise and hold the component in your hands.
1. Place Receiver (1), Special Tool 9320-5, into cup area of Press (3), Special Tool C-4212F, as shown and tighten set screw.
2. Place Remover (2), Special Tool 9320-3, onto end of screw-drive of Press (3), Special Tool C-4212F, as shown.
3. Using a pair of snap-ring pliers (2), remove snap ring (3) from bottom of ball joint (1).