300 SRT-8 V8-6.1L VIN W (2005)
31. Remove travel limiter (2) from bushing inner metal sleeve (1). To do so, use an appropriate grinding tool to remove inner metal sleeve material
until limiter can be safely removed.
32. Slide Support (2), Special Tool 9031-9, into end of crossmember (3) surrounding bushing bore as shown.
33. Snug set-screws (1) securing Support (2) to crossmember.
34. Insert Brace (1), Special Tool 9031-10, between Support 9031-9 (3) and bushing bore flange (2) matching step in Brace to bore flange.