300 SRT-8 V8-6.1L VIN W (2005)
4. Install brake rotor (3) over wheel mounting studs and onto hub (1).
5. Install disc brake caliper and adapter assembly (3) over brake rotor.
6. Install mounting bolts (1) securing caliper adapter (3) to knuckle (2). Tighten bolts to 95 Nm (70 ft. lbs.) torque.
7. Install hub nut (1) on end of half shaft (2). While a helper applies brakes to keep hub from turning, tighten hub nut to 213 Nm (157 ft. lbs.) torque.
8. Verify proper adjustment of the parking brake shoes and adjust as necessary.