300M V6-3.5L VIN G (2000)
Amplifier: Service and Repair
Midline and Infinity I System
REMOVAL
Negative Battery Cable Remote Terminal
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove right under panel silencer/duct. Refer to Instrument Panel and Systems for Removal and Installation procedures.
3. Remove two retaining nuts to remote amplifier.
Midline/Infinity/Remote Amplifier Location
4. Pull amplifier inboard and then pull downward to remove from upper retaining clips.
5. Disconnect two wiring connectors.
6. Remove remote amplifier from vehicle.
INSTALLATION
For installation, reverse the above procedures.
