300M V6-3.5L VIN G (2000)
Vehicle Speed Sensor/Transducer - Cruise Control: Description and Operation
The PCM receives a signal from the TCM and the transaxle output speed sensor over the bus communication line.
The 4 speed automatic Transmission Control Module (TCM) supplies the speed input to the PCM. The PCM determines acceleration rates. The speed
control software in the PCM uses vehicle speed and acceleration to control to the set speed.
Vehicles with a 3 speed automatic or manual transmission have a Vehicle Speed Sensor (VSS) mounted to an adapter near the transmission output shaft.
The sensor is driven through the adapter by a speedometer pinion gear. The VSS pulse signal is monitored by the PCM to determine vehicle speed and to
maintain speed control set speed. Refer to the appropriate Powertrain Diagnostic Procedures for diagnosis and testing of this component.
