300M V6-3.5L VIN G (2000)
Odometer: Service and Repair
The instrument cluster must be removed for Odometer service. Refer to Instrument Cluster Removal and Installation procedures.
The odometer and PRNDL are one assembly retained by three screws.
Negative Battery Cable Remote Terminal
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument cluster from vehicle. Refer to Instrument Cluster Removal and Installation.
3. Remove five cluster back cover retaining screws and remove the cover.
4. Unplug connectors from printed circuit board.
5. Remove cluster mask/lens from instrument cluster. Refer to Mask/Lens Removal and Installation.
6. Remove two screws to Vacuum Fluorescent (VF) display Odometer and remove from cluster.
INSTALLATION
For installation, reverse the above procedures.
