Aspen 2WD V8-4.7L (2007)
9. Connect the battery negative cable.
10. Turn the ignition to the "RUN" position.
11. Check for battery voltage on terminals 4 and 6 of the switch/module connector of the inoperative seat. Battery voltage should be present on both
terminals. If OK go to STEP 5. If NOT OK repair the open or shorted fused B(+) circuit as required.
12. Check for continuity between ground terminal 1 of the switch/module connector of the inoperative seat and a good ground. If OK go to STEP 6. If
NOT OK, repair the open or shorted ground circuit as required.
13. Check for continuity between the heated second row seat element supply circuit terminal 3 of the switch/module connector of the inoperative seat
and the heated second row seat element connector of the inoperative seat. If OK go to STEP 7. If NOT OK, repair the open or shorted supply
circuit as required.
14. Perform the heated second row seat element diagnosis for the inoperative seat. If the elements test OK, replace the inoperative heated seat
switch/module. If NOT OK, replace the inoperative heated second row seat element.