Aspen 2WD V8-4.7L (2007)
Seals and Gaskets: Service and Repair
Rear Axle - 8 1/4
Removal
REMOVAL
1. Remove axle shaft.
2. Remove axle shaft seal (1) from end of the axle tube (2) with a pry bar.
Installation
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Coat new seal lip with axle lubricant and install seal with Installer 9337 (1) and Handle C-4171 (2).
3. Install axle shaft.
Removal
REMOVAL
