Aspen 2WD V8-5.7L (2007)
Throttle Body: Service and Repair
Removal
5.7L V-8
CAUTION: Do not use spray (carb) cleaners on any part of the throttle body. Do not apply silicone lubricants to any part of the throttle body.
1. Remove air duct and air resonator box at throttle body.
2. Disconnect electrical connector at throttle body (2).
3. Remove four throttle body mounting bolts (4).
4. Remove throttle body from intake manifold.
5. Check condition of throttle body O-ring (2).