Aspen 2WD V8-5.7L Hybrid (2009)
Hybrid Battery Service Switch: Service and Repair
High Voltage Service Disconnect - Removal
REMOVAL
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In
addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High
Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury See: Battery System, Hybrid
Drive/Service Precautions
1. Remove the drivers side high voltage battery access panel.
2. Service disconnect (1) as it is active in the vehicle.