Aspen 4WD V8-5.7L Hybrid (2009)
Front Bumper Cover / Fascia: Service and Repair
Fascia Support Bracket - Installation
INSTALLATION
1. Install the fog lamps into the bumper, if necessary, See: Lighting and Horns/Fog/Driving Lamp/Service and Repair/Fog Lamp - Removal.
2. Position the bumper onto the bumper support and seat the tabs fully.
3. Connect the fog lamp electrical connectors, if equipped.
4. Install the front bolts next to the fog lamps.
5. Install the fascia. See: Front Bumper Fascia - Installation