Aspen 4WD V8-5.7L Hybrid (2009)
4. Install the rear cables (2) into the tensioner rod behind the rear of the brake assembly (1).
5. Install the cable to the intermediate cable connector.
6. Release and remove the lock out device.
7. Perform the park brake adjustment procedure, See: Parking Brake Tensioner/Adjustments.
8. Remove the supports and lower the vehicle.
Right Rear Cable
RIGHT REAR CABLE
1. Install the brake cable (2) to the brake lever (3).
2. Install the cable bracket to the shock bracket.
3. Install the cable to the axle bracket.
4. Install the cable to the frame bracket.
5. Install the right cable to the equalizer.
6. Install the right cable to the front cable.
7. Adjust the brake cable at the equalizer and using the adjuster nut.
Left Rear Cable
LEFT REAR CABLE
