Aspen 4WD V8-5.7L Hybrid (2009)
8. If removed, Install the Traction Power Inverter Module (TPIM) (1) See: Hybrid Drive Systems/Power Control System/Voltage Inverter/Service
and Repair/Traction Power Inverter Module - Installation
9. Verify the throttle body seal is properly aligned at the bottom of the air cleaner housing.
10. Slide the rear air cleaner housing pegs (2) into the grommets (1) on the rear of the intake manifold and lower the front of the air cleaner housing
onto the throttle body.
NOTE: Verify the air cleaner housing (3) is installed properly in the rear grommets by reaching around the left rear corner of the air cleaner
and feeling for the pegs protruding through the rubber grommets. If the plastic pegs cannot be felt, the air cleaner will need to be
reinstalled.