Aspen 4WD V8-5.7L Hybrid (2009)
NOTE: When the oil pan is removed, a new integral windage tray and gasket assembly must be installed. The old gasket cannot be reused.
3. Install a new integral windage tray and gasket.
4. Install the oil pump pickup tube with new O-ring. Tighten tube to pump fasteners to 28 Nm (250 in. lbs.).
NOTE: The double ended oil pan studs must be installed in the same location that they were removed from.
5. Position the oil pan and install the mounting bolts and studs. Tighten the mounting bolts to 12 Nm (105 in.lbs.).