Aspen 4WD V8-5.7L Hybrid (2009)
4. Remove the high voltage cable at the TPIM from the A/C compressor (1) (2).
5. Remove the high voltage retainer (2) from the inside of the TPIM, then loosen the mounting retainers (1) from the high voltage battery.
6. Drain the cooling system. See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining.
7. Remove the TPIM coolant recovery container mounting bolt and position aside.
8. Disconnect the two TPIM coolant hoses (1).