Aspen 4WD V8-5.7L Hybrid (2009)
Transfer Case Actuator: Service and Repair
Shift Motor - Removal
REMOVAL
NOTE: New shift motor assemblies are shipped in the NEUTRAL position. If a new shift motor assembly must be installed, it will be
necessary to shift the transfer case to the NEUTRAL position prior to motor installation.
1. Disconnect the electrical connector from the shift motor.
2. Remove the bolts holding the shift motor to the transfer case.
3. Remove the shift motor (1) from the transfer case.
4. Remove the O-ring seal (2) from the shift motor (1).