Aspen 4WD V8-5.7L Hybrid (2009)
Fluid Pump: Service and Repair
Transmission Auxiliary Oil Pump - Removal
REMOVAL
WARNING: Be certain the procedure for the high voltage check-out has been performed and the service disconnect has been disconnected.
Failure to follow these instructions may result in serious or fatal injury.
1. Raise and support the vehicle.
2. Place a suitable drain pan. beneath the auxiliary oil pump.
3. Disconnect the transmission auxiliary oil pump electrical connector.
4. Remove the bolt (1) attaching the transmission auxiliary oil pump harness (2) to the transmission bellhousing (3).
5. Remove the four transmission auxiliary oil pump bolts (1) and the auxiliary oil pump. Remove and discard the gasket (2).