Aspen 4WD V8-5.7L Hybrid (2009)
Seals and Gaskets: Service and Repair
Rear Axle - 9 1/4
Axle Shaft Seal - Removal
REMOVAL
1. Remove axle shaft.
2. Remove axle shaft seal (1) from end of the axle tube (2) with a pry bar.
Axle Shaft Seal - Installation
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Coat new seal lip with axle lubricant and install seal with Installer 9337 (1) and Handle C-4171 (2).
3. Install axle shaft.
Pinion Seal - Removal
REMOVAL
