Cirrus V6-2.5L VIN H (1995)
![background image](/chrysler/cirrus/v6-2.5l_vin_h/Page-2599001.png)
Rear Door Latch: Service and Repair
Rear Door Latch
REMOVAL
1. Remove rear door trim panel.
2. Close door glass.
3. Remove lower rear run channel.
4. Disengage clips holding linkage rods to door latch.
5. Separate linkage rods from latch.
6. Remove screws holding latch to door end frame.
7. Separate latch from door.
INSTALLATION
CAUTION: Do not close door before adjusting the door latch, door may fail to open.
1. Reverse the preceding operation for installation.