Cirrus V6-2.5L VIN H (1995)
![background image](/chrysler/cirrus/v6-2.5l_vin_h/Page-2330001.png)
Blower Motor Resistor: Service and Repair
Fig 15 Blower Motor Resistor
NOTE: The blower motor resistor is located on the lower right side of the heater housing.
REMOVAL
1. Remove lower right underpanel silencer/duct.
2. Disconnect wiring connectors on blower motor resistor.
3. Remove blower motor resistor retaining screws.
4. Pull blower motor resistor out of heater housing.
INSTALLATION
For installation, reverse the above procedures.