Cirrus V6-2.5L VIN H (1995)
Control Module HVAC: Service and Repair
Fig 29 Control Module
NOTE: The control module is located below the radio.
REMOVAL
1. Place the ignition key in the OFF position before removing control module.
2. Remove trim bezel.
Fig 30 Control Module Screws
3. Remove cluster hood bezel retaining screws in the trim bezel opening.
4. Pry up the cluster hood bezel a few inches to expose the cubby bin/cigar lighter bezel screws.
5. Remove the cubby bin/cigar lighter bezel and wiring.
6. Remove the control module retaining screws.
Fig 31 Control Module At Bezel Opening