Cirrus V6-2.5L VIN H (1995)
Fluid Filter - A/T: Customer Interest
A/T - Shudders During Upshift With No DTC's Present
NO: 21-11-96 Rev. A
GROUP: Transmission
DATE: Aug. 9, 1996
SUBJECT:
Shudder During 1-2 Upshifts -
41TE And 42LE Transaxles
With No Diagnostic Trouble
Codes (DTC's) Present
NOTE :
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 21-11-96, DATED JUL. 19, 1996, WHICH SHOULD BE REMOVED
FROM YOUR FILES. A LABOR OPERATION NUMBER IS REVISED AND IS HIGHLIGHTED WITH **ASTERISKS**.
MODELS:
1995
(AA)
Spirit/Acclaim/LeBaron Sedan
1995
(AJ)
LeBaron Convertible
1995
(AS)
Town & Country/Caravan/Voyager
1995
(ES)
Chrysler Voyager (European Market)
1995 - 1996
(FJ)
Sebring/Avenger/Talon
1996
(GS)
Chrysler Voyager (European Market)
1996
(JX)
Sebring Convertible
1995 - 1996
(JA)
Cirrus/Stratus/Breeze
1995 - 1996
(LH)
Concorde/Intrepid/LHS/New Yorker/Vision
1996
(NS)
Town & Country/Caravan/Voyager
NOTE:
THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 41TE OR 42LE TRANSAXLE BUILT BEFORE MAR. 18, 1996
(TRANSAXLE IDENTIFICATION CODE NUMBER XXX-2652-XXXX).
SYMPTOM/CONDITION:
Vehicle shudders during light to moderate throttle 1-2 upshifts.
DIAGNOSIS:
Using the Mopar Diagnostic System (MDS) or the Scan Tool (DRB III) with the appropriate Diagnostic Procedure Manual and Supplement if
applicable, verify all engine/transmission systems are functioning as designed. If Diagnostic Trouble Codes (DTC's) are present, record them on the
repair order and repair as necessary before proceeding further with this bulletin.
Test drive the vehicle on a smooth road surface. If the vehicle shudders during 1-2 upshifts with light to moderate throttle application, perform the Repair
Procedure.
PARTS REQUIRED:
4
4799860AA
Disc, 2-4 Clutch
4
4659054
Plate, Separator
AR
(1)
4882934
Package, Seal and Gasket 4ITE
AR
(1)
4882919
Package, Seal and Gasket 42LE
AR
4798233
Fluid, Automatic Transmission (Type 7176)
AR
(1)
4864505
Filter, 41TE
AR
(1)
4796730
Filter, 42LE
AR
(1)
4446620
Piston, 2-4 Accumulator
AR
(2)
4446544
Ring, Teflon Seal
REPAIR PROCEDURE:
This bulletin involves replacing the 2-4 clutch separator plates, installing revised 2-4 clutch discs and revised seals.