Concorde V6-2.7L VIN R (1998)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REMOVAL
1. Remove upper radiator crossmember.
2. Remove fan module. Refer to Cooling System.
3. Remove accessory drive belt and air conditioning belt. Refer to Cooling System.
Figure 30-Crankshaft Damper Center Bolt-Removal And Installation
4. Remove damper center bolt while holding the damper with Special Tool 8191.
CAUTION: Before removing damper, verify that A/C belt tensioner is not contacting the damper, as damage could occur to tensioner, timing
chain cover, and/or damper.
Figure 31 Crankshaft Damper - Removal
5. Remove damper by using Special Tools 8199 Insert and 1023 Three Jaw Puller.