Concorde V6-2.7L VIN R (1998)
Power Steering Line/Hose: Service and Repair
Installation
1. Install the power steering hoses into the vehicle using the reverse of the removal procedure.
2. Raise the vehicle.
3. Install the power steering fluid return hose on the power steering fluid cooler. Be sure the hose clamp is installed past the upset bead on the power
steering fluid cooler.
4. Lower the vehicle until the tires are just clear of the floor
Power Steering Hose To Frame Rail Routing Clip
5. Install the routing clips for the power steering hoses onto the left frame rail. Install and securely tighten the bolts mounting the routing clips to the
frame rail to 10 Nm (89 inch lbs.).
6. Slide steering gear and intermediate shaft back into dash panel sealing boot. Align the steering gear mounting holes with its mounting holes in
crossmember.
Steering Gear Attachment To Crossmember (Left Side)
7. Loosely install the bolts mounting the left side of the steering gear to the crossmember.
