Concorde V6-2.7L VIN R (1998)
EGR Tube: Service and Repair
Lower EGR Tube
Fig 7 EGR Tube At Intake Manifold
REMOVAL
1. Disconnect negative battery cable.
2. Remove air inlet tube and resonator.
3. Remove EGR tube mounting screws at EGR valve (Fig. 7).
4. Remove EGR tube mounting screws at exhaust manifold.
INSTALLATION
1. Install new gasket between the EGR valve and tube and install bolts.
2. Install new gasket between the exhaust manifold and tube and install bolts.
3. Tighten the EGR tube to EGR valve bolts to 11 Nm (95 in. lbs.) torque.
4. Tighten the EGR tube to exhaust manifold bolts to 11 Nm (95 in. lbs.) torque.
5. Install air inlet tube and resonator.
6. Connect negative battery cable.
