Concorde V6-2.7L VIN R (1998)
Lateral Stabilizer Rod: Description and Operation
The purpose of the lateral links and trailing arms is to control the movement of the rear spindle. The lateral links control the lateral movement of the rear
spindle while the trailing arms control the fore and aft movement of the spindle. The lateral links and trailing arms have rubber isolator bushings at each
end. The lateral links are attached to the rear crossmember, and the spindle, using a bolt and nut assembly at each end of the link. The trailing arms are
attached to the spindle, and the body of the vehicle. The trailing arm attaches to the rear spindle through a bracket which is bolted to the bottom of the
spindle. The trailing arm attaches to the body using a bracket attached to the frame rail and rear torque box. The rear lateral link incorporates a threaded
adjustment link to provide a means for rear wheel Toe adjustment.
Lateral links, trailing arms and knuckles are normally replaced only when the part has been damaged or when the vehicle has been involved in an
accident. If a suspension part has been damaged, be sure to check the underbody dimensions of the car. If underbody dimensions of the vehicle are not
correct, the frame must be straightened before replacement suspension components are installed.
