Concorde V6-2.7L VIN V (2001)
CD Changer: Service and Repair
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove ash receiver (if applicable).
3. Using a trim stick (special tool #C-4755), gently pry out on center trim bezel. Disconnect wiring connectors to HVAC controls, cigar
lighter/auxiliary power outlet and traction control switch.
4. Remove instrument panel center trim bezel.
5. Remove two retaining screws to in-dash CD changer.
6. Pull CD changer out of instrument panel, disconnect wiring and remove from vehicle.
INSTALLATION
1. Connect wiring install CD changer into instrument panel.
2. Install two retaining screws to in-dash CD changer.
3. Install instrument panel center trim bezel.
4. Connect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch.
5. Place center trim bezel into position and snap into place.
6. Install ash receiver (if applicable).
7. Connect the negative battery cable remote terminal to the remote battery post.
