chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Speaker - Rear Shelf Replacement|Page 5346 > < Speaker - Rear Shelf Replacement
Page 1
background image

Speaker: Service and Repair
Speaker - Rear Door (Infinity II) Replacement

REMOVAL

Negative Battery Cable Remote Terminal

1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Open rear door.

Fig.14 Rear Door Speaker

3. Using a trim stick (special tool #C-4755), carefully pry speaker grille away from door trim panel.
4. Remove two speaker retaining screws.
5. Pull speaker away from door and disconnect wiring.

INSTALLATION

1. Connect wiring and place speaker in door speaker opening.
2. Install two speaker retaining screws.
3. Place speaker grille into place and firmly snap into place on the door trim panel.
4. Close the rear door.
5. Connect the negative battery cable remote terminal to the remote battery post.

Speaker - Rear Shelf Replacement|Page 5346 > < Speaker - Rear Shelf Replacement