Concorde V6-2.7L VIN V (2001)
Grille: Procedures
GRILLE OPENING REINFORCEMENT
REMOVAL
1. Open hood.
2. Mark bolt locations on the upper radiator closure panel.
3. Remove bolts attaching windshield washer bottle and speed control servo, if equipped.
4. Remove headlamp jackscrews both sides.
5. Remove fasteners attaching upper bumper fascia.
6. Remove bolts attaching the forward edge of upper radiator closure panel.
7. Remove bolts attaching upper radiator closure panel.
8. Disconnect hood latch cable from hood latch.
9. Remove upper radiator closure panel from vehicle.
10. For replacement of upper radiator closure panel remove hood latch, and any other hardware.
INSTALLATION
1. Place in position the upper radiator closure panel.
2. Connect hood latch cable to hood latch.
3. Install bolts attaching upper radiator closure panel. Check bolt alignment marks.
4. Install bolts attaching the forward edge of slipper radiator closure panel.
5. Install fasteners attaching upper bumper fascia.
6. Install headlamp jackscrews both sides.
7. Check hood latch operation.
