Concorde V6-2.7L VIN V (2001)
5. Using a trim tool, disengage the retaining clips from the door trim panel to the sheet metal inner panel, two clips at the rear of panel and one at the
front of the panel (REAR DOOR INNER TRIM PANEL TYPICAL).
6. Raise trim panel up over the door flange and being careful to hold the panel securely.
7. Disconnect the remote linkage from the door remote handle.
8. Remove the wire connect from the rear door speaker, if equipped.
9. Disconnect power window switch wire connector.
10. Disconnect wiring harness clips from the trim panel.
11. Disconnect the courtesy lamp, if equipped.
12. Remove trim panel from door.
INSTALLATION