chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Sensors and Switches - Cooling System > < Radiator Cooling Fan Motor Relay|Diagrams|Page 1737
Page 1
background image

Radiator Cooling Fan Motor Relay: Description and Operation

DESCRIPTION 

The low speed and high speed fan relays are located in the Power Distribution Center (PDC) near the battery. A decal on the inside of the PDC covers
shows the locations of each relay and fuse contained in the PDC. It is an ISO relay.

OPERATION 

The cooling system uses two fans. Both fans operate at two different speeds, low and high. Depending on engine coolant temperature and A/C system
high side pressure, the fans operate at either low or high. The PCM controls radiator speed by grounding the coil side of either the low speed fan relay
or the high speed fan relay. The ignition switch supplies voltage to the coil sides of the relay. When the PCM grounds the coil side of the relay, the
contacts close and the battery supplies power to the fans.

Sensors and Switches - Cooling System > < Radiator Cooling Fan Motor Relay|Diagrams|Page 1737