Removal and Installation of Concorde V6-27L VIN V Drive Belt Components
1. Loosen tensioner pulley locking nut (Fig. 2).
2. Loosen belt adjusting bolt (Fig. 2).
3. Remove generator/power steering belt.
INSTALLATION
AIR CONDITIONING BELT - NEW
WARNING: DO NOT REMOVE A/C BELT TENSIONER LOCKING BOLT WITHOUT FIRST HOLDING THE TENSIONER WITH A
1/2" DRIVE BREAKER BAR, AS PERSONAL INJURY COULD RESULT.
NOTE: Verify that torsion spring position is in the new belt position before installing a NEW belt (Fig. 4). If torsion spring is not in the new belt
position, follow steps 1 - 7 to change the tensioner spring from the USED belt position to the NEW belt position.
1. Insert a 1/2" drive breaker bar into the square opening on the tensioner. Hold counterclockwise pressure on tensioner while removing the locking
bolt (Fig. 1).
2. Carefully release spring load of the torsion spring on the tensioner.