Concorde V6-2.7L VIN V (2001)
12. Install left side lower chain guide and tensioner arm (Fig. 120). Tighten attaching bolts to 28 Nm (250 in. lbs.).
NOTE: Inspect oil ring on chain guide access plug before installing. Replace O-ring as necessary.
13. Install chain guide access plug to left side cylinder head (Fig. 120). Tighten plug to 20 Nm (15 ft. lbs.).
NOTE: To reset the primary timing chain tensioner, engine oil will first need to be purged from the tensioner (Fig. 123).
14. Purge oil from timing chain tensioner using the following procedure:
a. Place the check ball end of tensioner into the shallow end of Special Tool 8186 (Fig. 123).
b. Using hand pressure, slowly depress tensioner until oil is purged from tensioner (Fig. 123).
15. Reset timing chain tensioner using the following procedure: