Concorde V6-2.7L VIN V (2001)
The Driver may select English, Francaise, Deutsch, Italiana, Espanol. The word Language is always in English regardless of which language is
selected. All other display nomenclature, including the trip computer functions, appears in the selected language.
-
DISPLAY US OR METRIC?
Toggles the trip computer temperature, fuel economy, and odometer display readings between the two sets of units. It also changes the odometer
display in the instrument cluster.
-
AUTO DOOR LOCKS?
When this feature is selected, all doors lock automatically when vehicle speed reaches 15 mph (25 km/h). Previously this feature could be
programmed only by a dealer.
-
AUTO UNLOCK ON EXIT?
When automatic locking is chosen, automatic unlocking may also be selected. When selected, all doors will unlock when the driver's door is open
if the vehicle is stopped and the transmission is in Park or Neutral.
-
REMOTE UNLOCK?
The driver may choose to have all the doors unlock at the first press of the unlock button, or unlock only the driver's door on the first press and
require a second press to unlock all doors.
-
REMOTE LINKED TO MEMORY?
When chosen, the Memory System will select memorized seat, mirror and radio settings when an RKE (remote keyless entry) transmitter unlock
button is pressed. If not chosen, selection of memorized settings may still be done using the memory buttons.
-
FLASH LAMP ON LOCK/UNLOCK?
If enabled, front and rear turn signal lamps will flash once when the doors are locked, and twice when the doors are unlocked using the RKE
transmitter. This feature may be selected with or without SOUND HORN ON LOCK?
-
HEAD LAMP DELAY
The driver may choose to have the head lamps remain ON, when leaving the vehicle, for 30 seconds, 60 seconds, 90 seconds or not at all.
-
HEAD LAMPS ON WITH WIPERS?
On vehicles with the automatic head lamps, the driver may choose to have the head lamps turn ON simultaneously with the windshield wipers. If
the head lamps were turned ON in this way, they will also turn OFF the wipers.
-
SERVICE INTERVAL
This feature selects an interval from 2000 to 7500 miles (3200 to 12,000 kilometers) in 500 mile (800 kilometer) increments between
PERFORM SERVICE alert messages. When service has been performed, the counter is reset by pressing and holding the RESET button for 3
seconds as before.
-
RESET SERVICE DISTANCE?
IF SERVICE INTERVAL is changed, this message asks if the accumulated service distance should be reset to 0 because the service was
performed.
-
EASY EXIT SEAT?
If enabled, the driver's seat moves rearward two inches (55 mm) (or to the farthest rearward position, if this is less) when the key is removed from
the ignition switch to facilitate driver exit from the vehicle. If the REMOTE LINKED TO MEMORY feature is enabled, the seat will return to the
memorized position when the RKE unlock button is pressed.
-
TILT MIRRORS DOWN?
This programmable feature only applies to vehicles equipped with the optional memory system. The options include Yes and No. The default is
No. When Yes is selected, and the vehicle is placed in reverse, the exterior mirrors tilt down towards the ground. Once reverse is disengaged, the
exterior mirrors will return to their original position.
-
TRAIN REMOTE?
The options include Yes and No. The default is No. When Yes is selected and the MENU button is pressed: a chime will sound and the EVIC will
display "PRESS REMOTE LOCK & UNLOCK THEN PRESS UNLOCK". You have approximately 30 seconds to train up to 4 remote key fobs:
after each remote key fob is trained a chime will sound indicating that the EVIC has received the training sequence. When you have finished
training the remote key fobs, press the Menu button again and the EVIC will display "TRAIN DONE, x TRAINED". If no remote key fobs are
pressed within approximately 30 seconds the EVIC will display "TRAIN TIMEOUT".
Memory Messages
-
MEMORY #X POSITION SET (X -1 OR 2)
This message appears when the Memory System is programmed. It is accompanied by a chime tone.
-
MEMORY SYSTEM DISABLED
