Concorde V6-2.7L VIN V (2001)
Turn Signal Lamp: Service and Repair
Turn Signal Lamp Unit Replacement
REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
2. Remove headlamp housing to access lamp housing.
3. Rotate and pull socket from lamp housing.
Fig.49 Front Parking, Side Marker, And Turn Signal Lamp Housing
4. Disconnect fastener attaching lamp housing to fascia.
5. Remove lamp housing from vehicle.
INSTALLATION
1. Place lamp housing in position on fascia.
2. Install lamp fastener.
3. Install bulb socket in lamp.
4. Connect the battery negative cable.
5. Verify lamp operation.
6. Install headlamp housing.
7. Close hood.