Concorde V6-2.7L VIN V (2001)
8. Loosen the lock-nut on the front of the pulley for the serpentine drive belt tensioner.
9. Using the adjustment bolt remove the tension from the drive belt for the power steering pump.
10. Remove the drive belt from the power steering pump pulley.
NOTE: Access for the power steering pump mounting bolts is through the holes in the face of the power steering pump pulley.
11. Remove the 3 bolts attaching the power steering pump to the power steering pump mounting bracket.
NOTE: The following step must be performed to have the space necessary to remove the power steering pump from the mounting bracket.
12. Insert a screwdriver between the power steering pump and the sleeve in the tensioner bracket. Using the screwdriver push the sleeve forward in the
tensioner bracket until it is flush with
13. Remove the power steering pump, power steering fluid reservoir and pulley as an assembly from the engine. Power steering pump is removed from
the top of the engine.
14. Transfer the required parts from the removed power steering pump to the replacement power steering pump.
INSTALLATION
1. Install the power steering pump back in the mounting bracket using the reverse sequence of its removal.
NOTE: The long mounting bolt for the power steering pump is installed in the location where the sleeve is in the tensioner bracket.
