Concorde V6-2.7L VIN V (2001)
Spindle: Service and Repair
REMOVAL
1. Raise vehicle on jackstands or centered on a frame contact type hoist.
2. Remove the rear wheel and tire assembly from the vehicle.
3. Remove the rear caliper assembly from the adapter. After removing caliper assembly store caliper by hanging it from frame of vehicle. Do not let
weight of rear caliper assembly hang from flexible brake hose. If vehicle is equipped with rear drum brakes, remove the brake flex hose bracket
from the support plate and wheel cylinder.
4. Remove rear braking disc from hub.
5. Remove rear hub and bearing assembly cotter pin and nut retainer. Remove the hub and bearing retaining nut and washer from the spindle. Then
remove hub and bearing assembly from spindle.