Concorde V6-201 3.3L VIN T FI (1993)
L.H. Driveshaft Exploded View
b. When installing outer CV joint into hub and bearing assembly, do not allow flinger disk, to become damaged.
c. Torque strut attaching bolts to 125 ft. lbs. Strut bolts have a serrated shaft so do not turn bolts in steering knuckle. Turn nut on bolts do not
turn bolts.
d. Apply vehicle brakes and torque new hub and bearing stub shaft nut to 120 ± 10 ft. lbs. Do not exceed 130 ft. lbs. as damage to driveshaft may
occur.
