Concorde V6-201 3.3L VIN T MFI (1994)
2. Remove bolt holding turning loop to shoulder belt height adjuster.
3. Separate turning loop from adjuster.
4. Disengage clips holding upper trim to B-pillar.
5. Separate B-pillar trim from vehicle.
INSTALLATION
1. Place B-pillar trim in position on vehicle.
2. Engage clips to hold upper trim to B-pillar.
3. Place shoulder belt turning loop in position on adjuster.
4. Install bolt to hold turning loop to shoulder belt height adjuster.
5. Install shoulder belt turning loop cover.
B-PILLAR LOWER TRIM REMOVAL
1. Remove upper B-pillar trim.
2. Remove bolt holding seat belt to floor below B-pillar.
3. Remove access door from above seat belt slot on B-pillar trim.
4. Disengage clips holding lower trim to B-pillar.
5. Separate B-pillar trim from vehicle.
INSTALLATION
1. Place B-pillar trim in position on vehicle.
2. Engage clips to hold lower trim to B-pillar.
3. Install access door above seat belt slot on B-pillar trim.
4. Install bolt to hold seat belt to floor below B- pillar.
5. Install upper B-pillar trim.
Upper Quarter Trim
UPPER QUARTER TRIM REMOVAL
1. Disengage clips holding upper quarter trim to inner quarter panel.
2. Separate upper quarter trim from vehicle.
INSTALLATION
1. Place upper quarter trim in position on vehicle.
2. Engage clips to hold upper quarter trim to inner quarter panel.