Concorde V6-3.2L VIN J (2000)
7.
Use a 10 mm socket to install the push nuts all the way down on the mounting bosses to secure the handle/bezel onto the door trim panel. Using a
wiggling side to side motion may be helpful, (Fig. 2).
8.
Install the lock switch from the original handle/bezel to the new door handle/bezel.
9.
Install the door trim panel using the procedures outlined on TechConnect or in Section 23 of the appropriate service manual.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.