Concorde V6-3.2L VIN J (2000)
Front Door Window Glass Weatherstrip: Service and Repair
FRONT DOOR GLASS RUN WEATHERSTRIP
REMOVAL
1. Remove door glass.
2. Loosen side view mirror.
3. Pull weatherstrip from lower front channel above door latch.
Fig. 3
4. Pull run weatherstrip from window frame channel (Fig. 3).
INSTALLATION
1. Clean butyl material from door flange area.
2. Place door run weatherstrip in position on window frame channel.
3. Push door run weatherstrip into window frame channel.
4. Push weatherstrip into lower front channel above door latch.
5. Install door glass.
6. Tighten side view mirror.