Concorde V6-3.2L VIN J (2000)
6. If the caliper is not being completely removed from the vehicle, support the caliper firmly to prevent weight of caliper from damaging the flexible
brake hose.
7. If required, remove rotor from hub by pulling it straight off wheel mounting studs.
INSTALLATION
CAUTION: Use care when installing the caliper assembly on the steering knuckle, so seals on caliper guide pin bushings do not get damaged by the
steering knuckle bosses.
1. Completely retract the caliper piston back into the piston bore of the caliper, if new brake shoes have been installed.