Concorde V6-3.2L VIN J (2000)
![background image](/chrysler/concorde/v6-3.2l_vin_j/Page-708001.png)
Exhaust Resonator: Service and Repair
Tailpipe and Rear Resonator
REMOVAL
1. Remove the exhaust system. Refer to Exhaust System; Service and Repair.
2. Loosen the clamp of the tailpipe/rear resonator assembly to the rear module.
3. Remove the tailpipe/rear resonator assembly
INSTALLATION
1. Install the tailpipe/resonator assembly onto the rear module and loose assemble the accompanying clamp.
2. Install exhaust system.
3. Tighten all band clamps to 61 Nm (45 ft. lbs.).