chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Auto Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3201

Concorde V6-3.2L VIN J (2000)

Page 1
background image

Idle Air Control (IAC) Motor: Service and Repair

REMOVAL

1. Disconnect the negative battery cable.
2. Disconnect the air plenum.

Idle Air Control Motor

3. Disconnect the electrical connector.
4. Remove the mounting screws.
5. Remove the IAC.

INSTALLATION

1. Install the IAC to the throttle body.
2. Tighten mounting screws to 3 Nm (25 in. lbs.) torque.
3. Attach electrical connector to the IAC.
4. Install air plenum and tighten the clamp.
5. Connect the negative battery cable.

Auto Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3201