Concorde V6-3.2L VIN J (2000)
6. Cycle the rack all the way to the left with the wheels off the ground. About 3-4 inches of the rack should now be visible.
7. Inspect the rack for any signs of corrosion. The rack will normally appear greasy and may look dark in color. Do not mistake this for corrosion on
the rack.
8. If the rack is corroded, perform Procedure B. If there is no corrosion, install the new rack protector and clamp, p/n 05018538AA and re-assemble
vehicle.
PROCEDURE B
1. Replace the steering gear as described on page 19-31 of the 2000 Concorde/Interpid/LHS/300M Service Manual (Publication No. 81-270-8140.)
TIME ALLOWANCE:
Labor Operation No:
19-00-01-92 (Procedure A)
0.3 Hrs.
Replace Rack Protector
19-00-01-93 (Procedure B)
3.2 Hrs.
Replace Steering Gear
FAILURE CODE: P8 - New Part