Concorde V6-3.2L VIN J (2000)
![background image](/chrysler/concorde/v6-3.2l_vin_j/Page-1349002.png)
Fig. 4
4. Remove front braking disk (rotor) from hub, by, pulling it straight off wheel mounting studs (Fig. 4).
Fig. 5
5. Remove the speed sensor cable routing bracket from the strut assembly (Fig. 5).
Fig. 4
4. Remove front braking disk (rotor) from hub, by, pulling it straight off wheel mounting studs (Fig. 4).
Fig. 5
5. Remove the speed sensor cable routing bracket from the strut assembly (Fig. 5).