Concorde V6-3.5L VIN G (2002)
Hood Latch Release Cable: Service and Repair
LATCH RELEASE CABLE
REMOVAL
1. Release hood latch by using the inside release, if still functioning. If not reach up through the bottom of the fascia opening and release the latch
pawl lever.
Fig. 5
Fig. 6
2. Disconnect hood release cable ferrule and cable end from hood latch assembly (Fig. 5) or (Fig. 6).
3. Remove left cowl side trim panel.
4. Remove screws attaching hood latch release cable handle to the cowl side.
5. Remove left wheel splash shield.
6. Disengage release cable from routing clips.
7. Roll carpet back to expose cable.