Concorde V6-3.5L VIN V (2003)
Seat Track: Testing and Inspection
1
Remove power seat switch from seat. Refer to the procedure in this section.
2. Disconnect wire harness connector.
3. Check Pin 1 for battery voltage and Pin 5 for ground.
Seat Track Motor Test
Fig.9 Power Seat Wire Harness Pin Call-Out
4. To test the seat motors and verify proper seat responses, refer to and the Seat Motor Test table. Using two jumper wires, connect one to a battery
supply and the second to a ground. Connect the other ends to the seat wire harness connector as described in the Seat Motor Test table.