Concorde V6-3.5L VIN V (2003)
11. Remove bolts attaching lower intake and remove intake manifold (Fig. 128).
INSPECTION
Check manifold for:
-
Damage and cracks
-
Gasket surface damage or warpage
-
Damaged fuel injector ports
If the manifold exhibits any of these conditions, replace the manifold.
INSTALLATION
1. Clean all sealing surfaces.
NOTE: Gaskets can be reused provided they are free of tears or cuts.
2. Inspect gaskets for tears or cuts. Replace as necessary.
3. Position gaskets and intake manifold on cylinder head surfaces.
4. Install fuel rail with injectors.